| 防水补漏基层要求 |
| 添加时间：2022/10/21 15:31:35 浏览次数： |
| 防水补漏基层要求 Requirements for waterproof leakage repair base 与防水材料接着的界面必须粪池模具 路缘石模具 唐山通风管道 塑钢电缆挂钩 钢纤维 钢制拍门 植绒机 铜雕佛像不可有膨鼓、起沙、蜂巢、木头、纸屑、污泥、小石块、也不能做在松 动不牢固的表体上，原因是附着性不良，再加上太阳紫外线破坏，建筑物本身热胀冷缩，以及水蒸气压 力破坏，容易造成防水层老化、失败。 The interface next to the waterproof material must not be bulging, sanding, beehive, wood, paper scraps, sludge, small stones, nor can it be made on the loose body. The reason is that the poor adhesion, together with the sun ultraviolet damage, the thermal expansion and contraction of the building itself, and the water vapor pressure damage, are easy to cause the aging and failure of the waterproof laye |
| 上一页 屋面作娱乐活动和工业场地， |
| 下一页 无机防水涂料 |
Copyright © 技术支持：遨游网络