天津市防水材料厂

什么防水涂料合卫浴间呢?这是大家一直都在关注着。一般的卫浴间渗漏水都是建筑的细部出了问题，最容易出问题的有三个地方，我们大家最应该注意，这三个地方就是地漏、墙角、管根，此三处由于接口较多，易出现缝隙，因此容易出现渗漏水。还有就是如果浴缸下水口与下水管接口不严密，就会很容易产生缝隙，出现渗漏水。

What waterproof coating is most suitable for bathroom? This is what we have been paying attention to. The general sanitary leaking water is the details of the construction of the problem, the most likely to have three places, we should all pay attention to the most, these three places are ground leakage, corner, pipe root, the three because of more interfaces, easy to crack, so easy to leak water. There is also that if the outlet of the bathtub is not tight with the water pipe, it will easily create gaps and leak water.

另一种情况是卫生间防水都已经做好了，但是在使用的过程中又发现了渗漏，这种情况就比较复杂了，如果能确定漏水点，针对性的将漏水点补漏相应的麻烦就会少一些，如果是大面积的漏水，那么就比较麻烦了，把地板全部翘起来重新做防水也是退而求其次的做法。

Another situation is that the toilet waterproof has been done well, but in the process of use also found leakage, this situation is more complex, if can determine the leakage point, the leakage of leakage points to the corresponding trouble will be less, if it is a large area of water leakage, then more troublesome, the floor is all the trouble, the floor is all Warping up and re doing waterproofing is the next best practice.

1、卫生间地面先做找平，对于新装修或重新装修的用户来说．如果你要更换卫生间的地砖．在将原有地砖凿去之后，一定要先用水泥砂浆将地面找平，然后再做防水处理。这样可以避免防水涂料因薄厚不均而造成渗漏。

1, the bathroom floor first leveling, for the newly decorated or redecorated users. If you want to replace the bathroom floor tiles. After chisel the original floor tiles, we must first use cement mortar to the ground leveling, and then do water treatment. This can avoid leakage caused by uneven thickness of waterproof coating.