| 卫生间防水补漏应该如何做呢? |
| 添加时间：2020/12/19 16:06:26 浏览次数： |
| 卫生间防水补漏应该如何做呢? How should the toilet be waterproof and leak-repairing? 首先我们要知道卫生间漏水是什么导致的，若是防水层导致漏水的，那就要把之前的瓷砖清除掉，再做一个基面的清洁。然后用水泥砂浆进行地面找平，给卫生间做进一步的防水处理。而且其墙面也要进行防水处理，其墙面防水的高度控制在30cm左右，如果你家使用两扇式的淋浴屏，相联的两面墙也要涂满。如果你家使用浴缸，与浴缸相邻的墙面.防水涂料的高度也要比浴缸上沿高出一些，这样做防水效果会更好。 First of all, we need to know what caused the toilet leak. If the waterproof layer causes the leak, it is necessary to remove the tiles before, and then do a base cleaning. Then the ground is leveled with cement mortar, and the toilet is further waterproof. And its walls should also be waterproof treatment, its wall waterproof height is controlled at about 30 cm, if you use two-fan shower screen at home, the two connected walls should also be painted full. If you use a bathtub in your home, the wall adjacent to the bathtub. The height of the waterproof paint is also higher than the top edge of the bathtub, so the waterproof effect will be better. 2. Two 若是防水层渗漏水的情况，那处理就比较简单，不用把瓷砖刨除，只要用新型的渗透型防水剂在其表面做一层防水，这样水就不会进入地下，可以直接从下水道流走。 If the waterproof layer leaks water, the treatment is relatively simple, do not need to remove the tile, as long as a new type of permeable waterproof agent to do a layer of waterproof on its surface, so that water will not enter the underground, can flow directly from the sewer. |
| 上一页 墙壁防水做在哪 |
| 下一页 防水堵漏方法 |
Copyright © 技术支持：遨游网络