| 防水的目的 |
| 添加时间：2019/8/20 15:33:22 浏览次数： |
| 防水的目的主要是自己家庭在使用流水时，会通过渗漏影响楼下的邻居。所以当自己家的屋顶漏水 或渗水时，在自己的顶棚做防水是无济于事的，必须在您楼上邻居的地面做防水才有效果。住在一楼的 用户虽然不用做防水，但是防水也能起到隔潮，隔湿等作用。 The main purpose of waterproofing is that when their families use running water, they will affect their downstairs neighbors through leakage. So when your roof leaks or seeps, it's no use waterproofing your own roof. You have to do waterproofing on your neighbor's floor upstairs to be effective. Users living on the first floor do not need to do waterproofing, but waterproofing can also play the role of moisture insulation, moisture insulation and so on. 防水的一般做法是：在原有的地面用水泥砂浆找平，待干燥后(指不潮湿)，用双组合成聚氨酯防水 涂膜匀刷3遍或用改性沥青或玻璃丝布做两油一布处理。要求卫生间墙面做1.2-1.5m高，厨房不低于0.5m 高，阳台以外墙窗台高度为准。 干燥后储水做24小时闭水封闭实验，确认无渗漏后进行地面施工。如果原有房间的地面或墙面遭到 破坏，则必须进行防水处理和闭水封闭实验。 The general method of waterproofing is: leveling the original ground with cement mortar, after drying (referring to not wet), using double combination of polyurethane waterproofing coating to brush three times or using modified asphalt or glass cloth to do two oils and one cloth treatment. Require bathroom wall to do 1.2-1.5 m high, kitchen not less than 0.5 m high, balcony outside wall windowsill height is the standard. After drying, water storage was done for 24 hours, and ground construction was carried out after confirmation of no leakage. If the ground or wall of the original room is damaged, waterproofing treatment and water closure experiments must be carried out. |
| 上一页 卫生间防水补漏应该如何做呢? |
| 下一页 防水补漏基本知识 |
Copyright © 技术支持：遨游网络