防水堵漏方法
防水堵漏方法
Waterproof and plugging methods
一、地下室工程
1、 Basement engineering
1侧墙、底板板面渗水
1. Water seepage on side wall and bottom plate
原因:
reason:
(1)混凝土施工质量差,存在微孔渗透;
(1) The construction quality of concrete is poor, and there is micropore penetration;
(2)防水涂层粘结不牢或损坏。
(2) The waterproof coating is not firmly bonded or damaged.
堵漏措施:
Plugging measures:
(1)将渗水部位清理干净,用水泥基防水涂料作堵渗处理。
(1) The water seepage part shall be cleaned up, and the cement-based waterproof coating shall be used for plugging.
(2)将渗水部位清理干净后,用水乳型氯丁橡胶沥青防水涂料等配合纤维增强材料作堵渗处理。
(2) After the water seepage part is cleaned up, the water emulsion
chloroprene rubber asphalt waterproof coating and other fiber reinforced
materials are used to block the seepage.
2地下室大面积严重漏水
2. Serious water leakage in large area of basement